抛光树脂MB-106UP

抛光树脂MB-106UP

 核子级抛光树脂杜笙 Tulsion® MB-106®UP NUCLEAR GRADE RESIN FOR PRODUCTION OF ULTRA PURE WATER 杜笙TULSION® MB-106 UP 是由核子级强酸型阳离子杜笙TULSION® T-46 及核子级强碱型阴离子杜笙TULSION®A-33 以1:2 体积比的剂量比例 , 预先混合的混床级离子交换树脂,专门提供给须要高纯水系统抛光用。杜笙TULSION® MB-106 UP is a mixture of strongly acidic cation resin 杜笙TULSION®T-46 in H+ form and strongly basic anion exchange resins 杜笙TULSION® A-33 in OH- form in stoichiometric equivalent quantities. 杜笙TULSION® MB-106 UP 是专门用于超纯水的最后段的抛光处理。杜笙TULSION®MB-106 UPis designed for use in the final polishing for production of ultra pure water. 杜笙TULSION® MB-106 UP适合用于电子产业 ，生产半导体及映像管产业等需要超纯水的行业。具有高的交换容量及优越的物理特性。 杜笙TULSION® MB-106 UP is the ideal choice for electronic industries which manufacture semi-conductors and television tubes etc. wher ultra pure water is required. The resin 信息bines high capacity with excellent physical properties TYPICAL CHARACTERISTICS ---------------------------------------- 基 本 特 性

	TULSION® T-46 (阳)	TULSION® A-33 (阴)
型式(Type)	强酸性阳离子交换树脂 (Strong acid Cation exchange resin)	强碱性阴离子交换树脂 (Strong base Anion exchange resin)
主体结构(Matrix Structure)	苯乙烯(Cross linked polystyrene)	苯乙烯(Cross linked polystyrene)
功能基 (Functional Group)	硫酸基(Sulfonic acid)	4级胺(Quaternary ammonium Type I)
物理性貭(Physical Form)	球状颗粒(Moist spherical beads)	球状颗粒(Moist spherical beads)
离子型式(Ionic form supplied)	氢(Hydrogen)	氢氧(Hydroxide)
粒径范围(U.S.mesh in wet)	16 to 50	16 to 50
粒度范围 (Particle Size)	0.3 to 1.2 mm	0.3 to 1.2 mm
微粒含量(Fines Content)	穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh)	穿过US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh)
总交换容量 (Total Exch. Capacity)	1.8 meq/ml minimum of 99% in hydrogen form	1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form
PH范围 (pH Range)	0 to 14	0 to 14
允许温度 (Temp. Stability)	120°C	60°C
溶解率 (Solubility)	Insoluble in all 信息mon solvents	Insoluble in all 信息mon solvents
溶出有机物(网站anic leachable)	Less than 0.2 mg KMNO4 per ml of wet resin	Less than 0.2 mg KMNO4 per ml of wet resin
密度Backwash settled density	Approx.750 gm/liter	Approx.750 gm/liter
不纯物(Impurities)	Fe=50 ppm(max)	Fe=50 ppm(max)
	Cu=50 ppm(max)	Cu=50 ppm(max)
	Pb=50 ppm(max)	Pb=50 ppm(max)
球粒强度(Bead strength)	Avg. not less than 500g/bead by Chatillon test (ASTM Standard)	Avg. not less than 300g/bead by Chatillon test (ASTM Standard)

特别提示：以上抛光树脂MB-106UP的供应由杜笙树脂中国办事处朱卫峰自行免费发布，仅供参考。该抛光树脂MB-106UP产品信息的真实性、准确性及合法性未证实。请谨慎采用，风险自负。如需了解更多关于抛光树脂MB-106UP的产品规格型号及批发价格或产品图片等详细参数说明资料；您可以进入杜笙树脂中国办事处朱卫峰网站咨询。本页收录查询：抛光树脂MB-106UP
复制本页链接：https://www.88huangye.com/huangyegy/show-78440.html
其它信息推荐：| 除重金属铜镍钴锰等用螯合树脂 | 铼吸取》杜笙树脂RCX-5143 | 杜笙进口原装吸附汞树脂CH-95 | 镓提取回收树脂 杜笙进口原装CH-920 GA | 吸金树脂杜笙Tulsion® A-21S | 抛光树脂MB-106UP