免费发布行业信息
企业电子商务平台
 
 
发布信息当前位置: 首页 » 供应 » 仪器、仪表 » 仪器仪表设计 » FT-100F粉末自动压实密度仪

FT-100F粉末自动压实密度仪

点击图片查看原图
品牌: 瑞柯
单价: 面议
起订:
供货总量:
发货期限: 自买家付款之日起 3 天内发货
所在地: 福建 厦门市
有效期至: 长期有效
最后更新: 2018-07-10 17:00
浏览次数: 2115
询价
公司基本资料信息
 
 
详细说明

FT-100F粉末自动压实密度仪

 

FT-100F粉末自动压实密度仪 

FT-100FPowder automatic *paction density testing (updated version)

1.   定义:Definition

压实密度的计算公式:压实密度=面密度/材料的厚度

在锂离子电池设计过程中,压实密度=面密度/(极片碾压后的厚度—集流体厚度) ,单位:g/cm3

*paction density calculation formula: the *paction density =surface density/ thickness of material

In the process of lithium ion battery design, *paction density = surface density / (The thickness of the pole plate  after crushing – current collector  thickness), unit: g/cm3

压实密度分为:负极压实密度Anode density(或称为阳极压实密度)和正极压实密度Cathode density(或称为阴极压实密度)。

*paction density is divided into: the cathode *paction density (or is called the Anode *paction density) and the Anode *paction density (or called the Cathode *paction density)

. 原理: Principle:

锂离子动力电池在制作过程中,压实密度对电池性能有较大的影响。通过实验证明,压实密度与片比容量,效率,内阻,以及电池循环性能有密切的关系。

In the process of making lithium ion power battery, The *pacting density has a large effect on battery performance.The test results show that the *paction density is closely related to specific capacity, efficiency, internal resistance and the performance of the battery cycle.

找出*佳压实密度对电池设计很重要。一般来说,压实密度越大,电池的容量就能做的越高,所以压实密度也被看做材料能量密度的参考指标之一。

It is important to find the optimal *paction density for battery design.Generally speaking, the higher the density, the higher the capacity of the battery, so the *pacted density is also seen as a reference indicator of the energy density of the material.

压实密度不光和颗粒的大小、密度有关系,还和粒子的级配有关系,压实密度大的一般都有很好的粒子正态分布。可以认为,工艺条件一定的条件下,压实密度越大,电池的容量越高。

The *paction density is not only related to the size and density of the particle, but also related to the level of the particle, Normally, High *paction density has a good particle normal distribution.It can be said that under certain conditions ,The higher density of the battery, the higher capacity of the battery.

合适的正极压实密度可以增大电池的放电容量,减小内阻,减小极化损失,延长电池的循环寿命,提高锂离子电池的利用率。在压实密度过大或过小时,不利于锂离子的嵌入嵌出。

The proper positive electrode *paction density can increase the discharge capacity of the battery, reduce the internal resistance, reduce the loss of polarization, extend the cycle life of battery, Improve the utilization rate of lithium ion batteries. If the The *pacted density is too large or too small , It is bad for the embedding of lithium ions.

.适用范围:Scope of application

在外力的压缩过程中,随着粉末的移动和变形,较大的空隙被填充,颗粒间接触面积增大,使原子间产生吸引力且颗粒间的机械楔合作用增强,从而形成具有一定密度和强度的压坯.

In the process of the *pression of external force, As the movement and deformation of powder, larger gap is filled, The contact area between particles increases, The interatomic appeal and mechanical wedge cooperation between particles will be enhanced, Thus forming a certain density and intensity of *pact.

满足标准:GBT 24533-2009 锂离子电池石墨类负极材料,附录L:粉末压实密度的测试方法,

Meet standard: GBT 24533-2009 lithium ion battery graphite type anode materials, appendix L: Test method of powder *paction density,

也可以用于具有类似特性之粉末和颗粒压实密度之测定;国际上粉末和颗粒测试方法相通。

It can also be used for the determination of powder and particle’s *paction density which have similar properties; The test methods of powder and particle are similar internationally.

.功能描述:Function description:

采用液压恒压加压测量系统,7寸触摸屏和PC软件控制,高精度荷重单元控制系统能精确采集应力变化数据,可以任意设置压力、时间数据,位移由位移传感器直读,温湿度数据通过传感器获得,多位数的AD芯片来保障数据的分析,全自动模式,手动操作模式及多段设置操作模式并存;标配PC软件可以获得应力与粉体密度关系曲线;时间与粉体屈服强度关系;过程数据的分析和曲线图谱,为生产企业和科研院所研发新品和改善工艺建立数据模型.提供中英文两种语言版本。

Adopts hydraulic constant pressureforcing pressure measurement system, 7 inch touch screen and PC software control, High precision load cell stress change control system can precisely collect  the stress change data, Date such as pressure, time Can be arbitrarily set, Displacement direct reading by displacement sensor, the temperature and humidity data obtained from the sensor, Multidigit AD chip to ensure data analysis, Automatic mode, Manual mode and Multistage set operating modes coexist; Configuring PC software to obtain the stress and powder density curve;The relationship between the time and the yield strength of the powder;Analysis of process data and curve spectrum , Set up data model  for production enterprises and scientific research institutes develop new products and improve the process. Provide both Chinese and English languages.


 
特别提示:以上FT-100F粉末自动压实密度仪的供应由宁波盘羊仪器有限公司自行免费发布,仅供参考。该FT-100F粉末自动压实密度仪产品信息的真实性、准确性及合法性未证实。请谨慎采用,风险自负。如需了解更多关于FT-100F粉末自动压实密度仪的产品规格型号及批发价格或产品图片等详细参数说明资料;您可以进入宁波盘羊仪器有限公司网站咨询。
 
本页收录查询:FT-100F粉末自动压实密度仪
复制本页链接:https://www.88huangye.com/huangyegy/show-101148.html
其它信息推荐:| FT-8200双电四探针粉末电阻率测试系统(智能型) | FT-301系列智能粉末电阻率测试系统 (升级版) | FT-100F粉末自动压实密度仪 | FT-100E多功能粉末堆密度仪 | FT-300系列粉末电阻率测试仪
 
免费发布供应信息行业分类
 
[ 供应搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 关闭窗口 ]
 
FT-100F粉末自动压实密度仪手机版:https://m.88huangye.com/5-0-101148-1.html
 
网站首页 | 版权隐私 | 使用协议 | 关于我们 | 反馈提交 | 联系方式 | 网站地图 | 企业新闻 | 广告服务 | 更新列表